Roland FR-1xb Uživatelský manuál stáhnout pdf (Strana 72)

Appendice

FR-1x V-Accordion

Equipement MIDI

1. Received data

■ Channel Voice Messages

● Note off

● Note on

● Control Change

• The value specified by a Control Change message is not reset by a Program

Change, etc.

❍

Bank Select (Controller number 0, 32)

•Only for Free Bass.

❍

Expression (Controller number 11)

• This adjusts the volume of a Part. It can be used independently from Volume

(CC07) messages. Expression messages are used for musical expression within

a performance, e.g., expression pedal movements, crescendo and decrescendo.

❍

Program Change

■ System Realtime Messages

❍

Active Sensing

•When Active Sensing is received, the FR-1x starts monitoring the intervals of all

further messages. While monitoring, if the interval between messages exceeds

420 ms, the same processing will be carried out as when All Sounds Off, All Notes

Off and Reset All Controllers are received, and message interval monitoring will

be halted.

2. Transmitted data

■ Channel Voice Messages

● Note off

● Note on

● Control Change

❍

Bank Select (Controller number 0, 32)

❍

Modulation number (Controller number 01)

❍

Volume (Controller number 7)

•Volume messages are used to adjust the level of the Orchestra, Organ and Drum

parts.

❍

Pan (Controller number 10)

• The stereo position can be adjusted in 127 steps.

❍

Expression (Controller number 11)

• This adjusts the volume of a Part. Expression messages are used for musical ex-

pression within a performance, e.g., expression pedal movements, crescendo and

decrescendo.

❍

Program Change

❍

Pitch Bend Change

❍

Effect 1 (Reverb Send level; Controller number 91)

• This message adjusts the Reverb Send level of all parts.

❍

Effect 3 (Chorus Send level; Controller number 91)

• This message adjusts the Chorus Send level of all parts.

■ System Realtime Messages

❍

Active Sensing

❍

Start

❍

Stop

3. Program change messages

Status 2nd byte 3rd byte

8nH kkH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

kk = note number: 00H~7FH (0~127)

vv = note off velocity: 00H~7FH (0~127)

Status

2nd byte 3rd byte

9nH kkH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

kk = note number: 00H~7FH (0~127)

vv = note on velocity: 01H~7FH (1~127)

Status

2nd byte 3rd byte

BnH 00H mmH

BnH 20H llH

n = MIDI channel number: 0H~FH (Ch.1~16)

mm = Bank number MSB: 00H~7FH

ll = Bank number LSB: 00H~7FH

Status

2nd byte 3rd byte

BnH 0BH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Expression: 00H~7FH (0~127)

Status

2nd byte

CnH ppH

n = MIDI channel number: 0H~FH (Ch.1~16)

pp = Program number: See “3. Program change messages”.

For the Sets, see “SET RX” à la p. 73

Status

FEH

Status 2nd byte 3rd byte

8nH kkH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

kk = note number: 00H~7FH (0~127)

vv = note off velocity: 00H~7FH (0~127)

Status

2nd byte 3rd byte

9nH kkH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

kk = note number: 00H~7FH (0~127)

vv = note on velocity: 01H~7FH (1~127)

Status

2nd byte 3rd byte

BnH 00H mmH

BnH 20H llH

n = MIDI channel number: 0H~FH (Ch.1~16)

mm = Bank number MSB: 00H~7FH

ll = Bank number LSB: 00H~7FH

Status

2nd byte 3rd byte

BnH 01H vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Modulation depth: 00H~7FH (0~127)

Status

2nd byte 3rd byte

BnH 07H vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Volume: 00H~7FH (0~127)

Status 2nd byte 3rd byte

BnH 0AH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Pan: 00H~40H~7FH (0~127) (left–center–right);

Initial value: 40H (center)

Status 2nd byte 3rd byte

BnH 0BH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Expression: 00H~7FH (0~127)

Status

2nd byte

CnH ppH

n = MIDI channel number: 0H~FH (Ch.1~16)

pp = Program number: 00H~7FH: program no. 1~128

Status

2nd byte 3rd byte

EnH llH mmH

n = MIDI channel number: 0H~FH (Ch.1~16)

mm, ll= Pitch Bend value 00 00H~40 00H~7F 7FH (–8192~0~+8191)

Status

2nd byte 3rd byte

BnH 5BH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Reverb Send level: 00H~7FH (0~127)

Status

2nd byte 3rd byte

BnH 5DH vvH

n = MIDI channel number: 0H~FH (Ch.1~16)

vv = Reverb Send level: 00H~7FH (0~127)

Status

FEH Transmitted about every 250ms.

Status

FAH This message is transmitted when the [METRONOME] switch is

pressed after assigning the “2” option to the “MFn” parameter.

Status

FCH This message is transmitted when the [METRONOME] switch is

pressed after assigning the “2” option to the “MFn” parameter.

CC00 CC32 Program

Change

TREBLE REGISTER TX/RX

00 11aBassoon

00 21bBandon

00 31cCello

00 4 1dHarmon

00 82aMaster

00 52bOrgan

00 62cAccord

00 72dViolin

FR-1x_F.book Page 72 Monday, January 9, 2012 12:34 PM

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Komentáře k této Příručce

Žádné komentáře

Roland FR-1xb Uživatelský manuál Strana 72

Komentáře k této Příručce

Související produkty a manuály pro Hudební nástroje Roland FR-1xb