Roland 24 bit Digital Studio Workstation VS-890 Uživatelský manuál Strana 31

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 148
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 30
Making a Multi-Track Recording
4
5
6
Move all channel faders to the 0 dB position.
Gradually raise the master fader to adjust the volume.
Adjust the input sensitivity, with the INPUT knob of the
channel input assigned as the source.
Get a strong input signal by having instrument volumes as
high as possible. At this time, raise the volume level as much
as possible without making the PEAK indicator light up.
Normally, this range is adjusted that the level meter
moves within -12 to 0 dB when the channel fader is set to
OdB.
Recording On a Track
1
1
2
Press [PLAY (DISPLAY)].
Hold down [STATUS] (any track is OK) and press [CLEAR].
Use the input mixer
channel fader to adjust the
volume level of each input
channel that you wish to
send to the master out. If
you have assigned these
input channels to tracks,
use chamiel fader to adjust
the recording level to each
tracks.
This section explains the procedure for the INPUTl jack to record an electric
guitar performance to track 1.
This will clear any existing
input and/or track routing
assignments.
Zobrazit stránku 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 147 148

Komentáře k této Příručce

Žádné komentáře