Roland ep-5 Servisní příručka stáhnout pdf (Strana 16)

– 16 –

Diaphragm

If P5 is equipped with I/P unit (EP5), the I/P unit must be removed to

access the diaphragm.

When installing the diaphragm make sure to place one washer on each

side of the diaphragm.

Put some Loctite 577 on the thread, install the screw 3 and tighten.

Make sure the diaphragm is centered.

Check the O-ring for the diaphragm cover 2, install the O-ring into the

positioner housing, then install cover 2. Secure crosswise with screws 1,

first turn loosely. Torque shall be 4,5 Nm (40 in-lbs).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Žádné komentáře

Roland ep-5 Servisní příručka Strana 16